GSO ISO/TR 16806:2017
Gulf Standard
Current Edition
·
Approved on
03 October 2017
·
Pneumatic fluid power -- Cylinders -- Load capacity of pneumatic slides and their presentation method
GSO ISO/TR 16806:2017 Files
English
12 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO/TR 16806:2017 Scope
1.1 This Technical Report describes how to calculate the loading limits for a pneumatic slide based upon:
— external forces applied in the three principle planes of a tool plate, and applied at any point;
— external torque applied in the three principle planes of a tool plate;
— bearing limits determined by the slide manufacturer in conjunction with the bearing supplier.
1.2 This Technical Report also describes how to calculate tool plate deflections due to the loads.
1.3 This Technical Report describes how to present the rating information in technical documentation for application by a user.
1.4 This Technical Report assumes that all of the applied loads and torque will be absorbed by the guide rods and not by the piston rod. Only the axial thrust load (but not the resulting moments) will be absorbed by the piston rod.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
GSO 1780:2010
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements
Recently Published from Mechanical Sector
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
GSO ISO 21384-2:2024
ISO 21384-2:2021
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
GSO ISO 22407:2024
ISO 22407:2021
Gulf Standard
Metallic materials — Fatigue testing — Axial plane bending method
GSO ISO 11114-6:2024
ISO 11114-6:2022
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing